PRODUCTS OF OIL AND ADDITIVES
ACCESSORIES CATALOGUES
CLEANERS
-
Sensor Air Flow Cleaner Spray - 200ml. (4066)
- Product code: 4066
- Make: LIQUI MOLY
- Weight: 300.00 g
11.50 €
Price Without VAT
Upholstery cleaner 400ml (843654897002)
Active spray foam to clean any type of upholstery
Common Problems: Interior Dirt Upholstery
Active spray foam to clean any type of upholstery. Dissolves dirt and removes stains on natural and synthetic fabrics.
Clean and eliminate odors in: cars, caravans, boats, houses, offices, waiting rooms.
WHAT DOES?
Dissolves dirt and removes stains on natural and synthetic fabrics
WHEN TO USE IT? FOR:
- Clean and eliminate odors in: cars, caravans, boats, houses, offices, waiting rooms
- Clean and remove odors from drinks, cigarettes, food, pets.
HOW TO USE
1- Shake container before use
2- Spray on the surface or fabric
3- Let the foam act until it disappears
4- Rub with a damp cloth
5- On persistent stains, scratch with the supplied brush- Product code: 843654897002
- Make: TRATAUTO
- Weight: 500.00 g
10.75 €
Price Without VAT
Dashboard cleaner 300ml (843654897418)
Special formula without silicone with a new car scent. Clean the plastic parts. Excellent cleaning and protection properties in every application. Suitable for all vehicle interior plastics. Renew and revive all interior plastics. Leaves a pleasant new car scent.
Silicone free.
WHAT DOES?
- Clean the plastic parts.
- Excellent cleaning and protection properties in each application.
- Suitable for all interior plastics of vehicles.
- Renew and revive all interior plastics.
- Leaves a pleasant new car scent.
- Silicone free.
HOW TO USE
1- Apply to the dashboard at a distance of approx. 20 cm.
2- Let it act for a few moments.
3- Clean the treated surface with a soft cloth.
USE WARNINGS
We recommend applying the product in any workshop or product site WITHOUT SILICONE.- Product code: 843654897418
- Make: TRATAUTO
- Weight: 500.00 g
9.90 €
Price Without VAT
Dielectric contact cleaner 300ml (843654897423)
Formula with proven effectiveness to clean, degrease and protect all types of electrical or electronic elements
WHEN TO USE IT? FOR:
- Clean and eliminate residues in fuse boxes, diagnostics, alternators, starters, coils, connectors, fuses and any other electrical or electronic equipment
- Displace moisture on any surface where it is applied, high performance as a dielectric. It can be used in voltages <= 30 Kv
- Reestablish optimal contact and protect against humidity in equipment subjected to extreme operating conditions
- Repairs or checks on electrical and electronic parts that require a contact cleaner with rapid action to evaporate without leaving residue
- Clean and maintain tools, electrical and electronic equipment, fuse boxes, diagnostics, alternators, starters.
HOW TO USE
1- Disconnect the electrical installations before applying
2- Shake the container and spray generously on the parts to be treated until the moisture displaces or the dirt disappears
3- Allow to dry and reconnect the electrical part
4- Spray at any angle, it is not conductive, it does not leave residue- Product code: 843654897423
- Make: TRATAUTO
- Weight: 500.00 g
9.90 €
Price Without VAT
Inlet Cleaner - 300ml. (843654897444)
Common Problems: Egr Valve Dirt
Aerosol, formulated to eliminate residues and sediments in the intake circuit. Its powerful action removes and cleans varnish, oil, carbon and grease residues in: Carburetion or injection engines. Diesel or gasoline engines, both aspirated and turbos. Clean debris and sediment in intake manifolds, butterfly valves, turbochargers, oxygen sensors.
WHAT DOES?
Its powerful action removes and cleans varnish, oil, carbon and grease residues in:
- Carburetion or injection engines
- Diesel or gasoline engines, both aspirated and turbos
WHEN TO USE IT? - FOR:
- Clean debris and sediment in intake manifolds, butterfly valves, turbochargers, oxygen sensors
- Restore the correct acceleration and engine idling pattern
- Use on disassembled or disassembled parts such as charred or oil-filled EGR valves and lambda probes
- Clean the crankcase ventilation elements
HOW TO USE
1- Disassemble pipes and elements present up to the intake manifold / Butterfly valve
2- Start the engine, until reaching service temperature
3- Maintain the engine at a speed of 1,500 r.p.m. constant
4- At a distance between 20 and 30 cm, apply a short spray of 3 sec. and check that the engine does not accelerate in an uncontrolled 5- way or noises are produced by Pre-ignition (Engines with Turbo)
6- Once the normal behavior of the engine has been verified, start spraying for 5-10 seconds and alternate each one with 3 accelerations. Be attentive to engine response
7- Once the process is finished, let the engine run for 5-8 minutes to balance the mixture values
8- Turn off the engine and reassemble the necessary elements- Product code: 843654897444
- Make: TRATAUTO
- Weight: 500.00 g
6.95 €
Price Without VAT
Automatic Transmission Flush 325ML (GA6801)
- Product code: GA6801
- Make: WYNNS
- Weight: 500.00 g
15.05 €
Price Without VAT
