PRODUCTS OF LAND ROVER ACCESSORIES
-
Performance accessories
-
Travel / touring
-
Interior trim
-
Wheel accessories
-
Name plate / decal / badges
-
Seating
-
Roof rack
-
Seat belts
-
Exterior trim
-
Diagnostics
-
Towing
-
Recovery & expedition
-
Mudflaps
-
Portable refrigerators
-
Wheel covers land rover
-
Door trim
-
Tools
-
Roll cages
-
Fitting kits
-
Land rover suspension kits & hardware
-
Land rover wheels
-
Hoods & canvas
-
Manuals / books
-
Carpets / mats
-
Winch bumpers
-
Rear steps
-
Protection & guards land rover
-
Protection
-
Lighting protection
-
Dog guards
-
Steering wheels
ACCESSORIES CATALOGUES
DIAGNOSTICS
See the Bearmach catalogs in the bottom of the left column, and in case you want an accessory that is not in the list provided below, please contact us.
-
LAUNCH S1 NEW GENERATION OBDII/EOBD MINI SCANNER (BA 5062)
This new generation OBDII/EOBD mini scanner, is a handy diagnostics tool to keep in your Landy and plug in when something goes awry...
• Allows you to read and clear all manufacturer’s EOBD engine type specific
codes: P1, U1, B1 & C1
• Read freeze frame data
• Data recording (live data, fault codes), up to 8 hours and replay
• Free updates online using high speed USB 2.0 port
• I/M readiness monitor status
• Turn off Malfunction Indicator Light (MIL)
• Built-in manufacturer specific DTC definitions - VIN ID
• Multiple languages (English, Spanish, French, Italian, German and Russian)
• Shows up to 4 live data graphics at the same time
• Big, bright and colour screen with resolution 320*240 dpi
• Built-in clock (recorded data time marking)
• Unicode and Cyrillic coding support for all languages
• Diagnostic help function- Product code: BA 5062
- Make: BEARMACH
- Weight: 1500.00 g
125,00 €
Price Without VAT
EOBD Cable for BA 5070 (BA 5071)
- Product code: BA 5071
- Make: BEARMACH
- Weight: 600.00 g
70,00 €
Price Without VAT
14 Cux Cable for BA 5070 (BA 5072)
- Product code: BA 5072
- Make: BEARMACH
- Weight: 600.00 g
78,00 €
Price Without VAT
Air Susp Cable P38 for BA 5070 (BA 5073)
- Product code: BA 5073
- Make: BEARMACH
- Weight: 200.00 g
Suitable for the following vehicles: Engine Year RANGE ROVER P38 (95-02) 1995-2002 87,51 €
Price Without VAT
Air Suspension Cable (Blue) (BA 5074)
- Product code: BA 5074
- Make: BEARMACH
- Weight: 250.00 g
106,25 €
Price Without VAT
Unlock Code For Hawkeye (BA 5075)
- Product code: BA 5075
- Make: BEARMACH
- Weight: 50.00 g
280,00 €
Price Without VAT
Dongle Green 10AS Security (BA 5076)
- Product code: BA 5076
- Make: BEARMACH
- Weight: 150.00 g
62,50 €
Price Without VAT
Land Rover Grey Adaptor (Teves MK25 EWS 3) (BA 5077)
Dongle Grey ABS/Security- Product code: BA 5077
- Make: BEARMACH
- Weight: 150.00 g
38,00 €
Price Without VAT
Hawkeye Update Cable (BA 5079)
- Product code: BA 5079
- Make: BEARMACH
- Weight: 150.00 g
35,00 €
Price Without VAT
14CUX Cable For Hawkeye Pro (BA 5084)
- Product code: BA 5084
- Make: BEARMACH
- Weight: 300.00 g
120,00 €
Price Without VAT
Launch CRP123 Premium (BA 8050)
The Launch Code Reader Professional CRP123 Premium Edition is a handheld diagnostic tool used to detect and report the cause of vehicle faults.- Product code: BA 8050
- Make: LAUNCH
- Weight: 3500.00 g
299,00 €
Price Without VAT
Launch CRP129 Evo (BA 8051)
The Launch Creader CRP129 Evo professional diagnostics tool, is a cost-effective and powerful machine. Featuring a larger 5” touch screen, two extra reset services, Auto-VIN technology and Automatic Inspection Report.- Product code: BA 8051
- Make: LAUNCH
- Weight: 3000.00 g
550,00 €
Price Without VAT
Launch CRP MOT II (BA 8052)
1.099,00 €
Price Without VAT
Launch X431 Pro-S (BA 8053)
This tablet-style car malfunction diagnostics device has been designed for Android operating systems. The X431 Pro-S has been designed with internet connectivity in mind, using Bluetooth communication to connect with the DBScar connector and a mobile terminal.- Product code: BA 8053
- Make: LAUNCH
- Weight: 3000.00 g
1.875,00 €
Price Without VAT
Launch X431 PRO4 (BA 8054)
2.600,00 €
Price Without VAT
Nanocom NCOM01 Kit For Defender TD5 (NCOM01)
The Nanocom Evolution for the Defender TD5 includes the following:
The main Nanocom Evolution unit.
Blue OBD lead (For connection between the Nanocom Evolution unit and the vehicle's OBD socket)
USB update lead (used to connect the Nanocom Evolution to a PC for updating license codes or installing new Firmware)
Unlock code packs for the Defender II TD5:
NCOM11:
TD5 Engine Management System
TD5 MAP a flashing function to remap the programmable type ECU's
Full of functions and features, the TD5 engine management software offers reading and clearing of fault codes, the read and write of certain settings including Injector codes. Viewing of Live data, checking of Outputs and putting the ECU into learn mode for the security coding. You should note that there are 2 variations of the TD5 ECU, MSB denotes a non programmable version where the later NNN can be programmed using the Nanocom Evolution.
NCOM12 Defender Systems:
Wabco ABS system (up to 2010)
Functions include Read and Clear faults, View Inputs and check various Outputs on the ECU and you can also use the Nanocom Evolution to bleed the primary and secondary hydraulic circuits.
Lucas 10AS Alarm (up to 2010)
The 10AS alarm will read and clear triggered events, allow you to view various settings and data as well as make and save changes to the data.You have a choice of Inputs again to see live data and can also test certain outputs to make sure the alarm is working as it should. Finally you can also program the PLIP (not the key) to the ECU.- Product code: NCOM01
- Make: LAUNCH
- Weight: 3500.00 g
Suitable for the following vehicles: Engine Year DEFENDER TD5 630,00 €
Price Without VAT
Nanocom NCOM01 Kit For Discovery TD5 (NCOM02)
The Nanocom Evolution for the Discovery II TD5 includes the following:
The main Nanocom Evolution unit,
Blue OBD lead (used to connect the Nanocom Evolution unit to the vehicles OBD socket),
USB Update lead (used to connect the Nanocom Evolution unit to a laptop/PC for updating Firmware or inputting the unlock codes).
Unlock code packs for the Discovery TD5:
NCOM11:
TD5 Engine Management System
TD5 MAP a flashing function to remap the programmable type ECU's
Full of functions and features, the TD5 engine management software offers reading and clearing of fault codes, the read and write of certain settings including Injector codes. Viewing of Live data, checking of Outputs and putting the ECU into learn mode for the security coding. You should note that there are 2 variations of the TD5 ECU, MSB denotes a non programmable version where the later NNN can be programmed using the Nanocom Evolution.
NCOM13 Discovery II Systems:
Valeo BCU (Body Control unit)
Reading of live Inputs, Settings, checking Outputs and key programming.
SLABS (combined Self Leveling and ABS system)
As well as the expected reading and clearing of faults, settings pages, Inputs and Outputs, you can also calibrate the Suspension and store the new heights. Note that the ECU will not allow individual calibration, only the Left and Right sides. There is also a bleed function for the hydraulic systems.
Lucas ACE (Active Cornering Enhancement)
This ECU was designed to help improve cornering issues found in the Discovery 1. The Nanocom Evolution has the ability to read and clear Faults, check settings, View Live data, check outputs and also bleed the ACE system.
BOSCH AUTO BOX GS8.87.0 (all Automatics)
Quite limited on functionality by design of the ECU, apart from the Read and Clear Faults you can only read the settings but not make changes. As with most ECU's we have designed our software to read live data and reset the adaptive values learned over time by the ECU
TRW SPS Type 2 Airbag
Only found in the Discovery II, it supports side Airbags and Seat Belt Pretensioners. Functionality is limited again by the ECU design to Reading and clearing any of the possible 37 faults that the ECU can store and also to read the settings. There is only one option programmable in the ECU and this is the VIN which should be written if the ECU is replaced.
Please note that the Cruise Control in the Discovery II TD5 is managed by the Engine management ECU and is not a seperate ECU- Product code: NCOM02
- Make: LAUNCH
- Weight: 3500.00 g
Suitable for the following vehicles: Engine Year DISCOVERY II TD5 630,00 €
Price Without VAT
HAND HELD SCANNER - LAND ROVER OBDII CODE READER (TF930)
Professional Multi-system Scanner TF930 for Land Rover & Jaguar Vehicles.TF930 is a professional vehicle fault diagnostic tool developed by iCarsoft Technology Inc. specifically pre-programmed for Land Rover and Jaguar vehicles. It supports full system diagnosis and is a powerful DIY tool enabling owners and technicians to accurately diagnose complex problems.
Various tools and devices to help self-diagnose problems with your Land Rover.- Product code: TF930
- Make: TERRAFIRMA
- Weight: 520.00 g
Suitable for the following vehicles: Engine Year Notes DEFENDER 1998 - 2012 DISCOVERY II 2002 - 2004 DISCOVERY III 2004 - 2009 DISCOVERY IV RANGE ROVER EVOQUE 2012 - 2013 RANGE ROVER RANGE ROVER 1999 - 2002 P38 RANGE ROVER RANGE ROVER L322 RANGE ROVER RANGE ROVER SPORT 2005 - 2013 159,00 €
Price Without VAT
MULTI VEHICLE SCANNER - CODE READER (TFI810)
- Product code: TFI810
- Make: TERRAFIRMA
- Weight: 480.00 g
75,00 €
Price Without VAT
IID TOOL BLUETOOTH DIAGNOSTIC TOOL - ALL (TFIIDBT)
The ultimate diagnostic tool for DIY use offering functionality previously only available in equipment many times more expensive.
Standard diagnostic functions are VIN lock free whereas advanced diagnostic functions such as programming and ECU flashing etc are VIN locked to 1 vehicle. Fast, easy to use, and highly portable. Operates with iOS and Android (IIDControl App), PC and MAC (IIDUpdater).
Faults read and cleared, service reset, suspension calibration, live data display, manual component activation, system configuration, personalisation and more?.
The perfect diagnostic tool for workshop and professional use.
Full diagnostic capability including system and component calibration, vehicle programming and personalisation (CCF), and ECU flashing. Fast, comprehensive, easy to use and extremely portable. Support provided by Gap Diagnostic?s industry leading support team.
For more information, user manual and quick start guides go to www.gap-diagnostic.com- Product code: TFIIDBT
- Make: TERRAFIRMA
- Weight: 140.00 g
Suitable for the following vehicles: Engine Year Notes DEFENDER 2007 - 2015 DEFENDER TD4 2007 - 2015 DISCOVERY III DISCOVERY IV FREELANDER II RANGE ROVER EVOQUE RANGE ROVER RANGE ROVER L405 RANGE ROVER RANGE ROVER L322 RANGE ROVER RANGE ROVER SPORT L320 & L 494 Ver todos los vehículos compatibles725,00 €
Price Without VAT
