EIGAS Automoción Logo

  • Land Allmakes4x4
  • Bearmach Logo

Rack Accessories

Filter by vehicle
Sort by:

  • Extended Hi-Lift Jack Adaptor - 250mm (JADA001)

    This adaptor fits onto your Hi-Lift jack and slots into the jacking points on your vehicle. nBlack powder coated high strength steel. nBolts securely onto the Hi-Lift jack foot. nCan be used with most jacking points.​ n250MM long.
    • Product code: JADA001
    • Make: FRONT RUNNER
    • Dimensions: 535x120x90
    • Weight: 2.000 Kg
    Suitable for the following vehicles: Engine Year
    Accesorios de rescate Pistas de rescate

    54.62

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Extended Hi-Lift Jack Adaptor - 350mm (JADA003)

    This adaptor fits onto your Hi-Lift jack and slots into the jacking points on your vehicle. n nBlack powder steel. nBolts securely onto the Hi-Lift jack foot. nCan be used with most jacking points.
    • Product code: JADA003
    • Make: FRONT RUNNER
    • Dimensions: 530x120x90
    • Weight: 2.800 Kg
    Suitable for the following vehicles: Engine Year
    Accesorios de rescate Pistas de rescate

    66.39

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Hi-Lift Jack Base Plate (JADA004)

    For use under Hi-Lift jack in mud or thick sand. nRaised middle section to stop jack slipping. nBlack powder coated steel. nFlat for easy storage.
    • Product code: JADA004
    • Make: FRONT RUNNER
    • Dimensions: 471x355x75
    • Weight: 3.600 Kg
    Suitable for the following vehicles: Engine Year
    Accesorios de rescate Pistas de rescate

    66.39

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Hi-Lift Jack Jacking Points (JADA006)

    Black powder coated high strength steel. nCan be mounted onto most vehicles. nAllows the vehicle to be jacked up using the Hi-Lift jack and Front Runner Extended Hi-Lift Jack Adaptor. nSupplied in pairs.
    • Product code: JADA006
    • Make: FRONT RUNNER
    • Dimensions: 265x180x90
    • Weight: 2.100 Kg
    Suitable for the following vehicles: Engine Year
    Accesorios de rescate Pistas de rescate

    57.98

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Hi-Lift Jack Bracket (JADA010)

    nMade of heavy gauge steel. nFinished with the same durable, weather resistant black powder coating as the Front Runner Slimline II Roof Rack. nLockable. Uses small wire locks such as the Master Lock Luggage Lock model 4688D. nConsists of two (2) brackets -  one to hold down the jack handle and the other to secure the base. nMounts easily to the side rails of the Front Runner Slimline II Roof Rack. nFits all size Hi-Lift Jacks. nNote: This product is not compatible with Slimsport rack kit range.
    • Product code: JADA010
    • Make: FRONT RUNNER
    • Dimensions: 281x184x95
    • Weight: 2.600 Kg
    Suitable for the following vehicles: Engine Year
    Accesorios de rescate Pistas de rescate

    113.45

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Hi-Lift Jack Bracket / Top Mount (JADA014)

    nThese two brackets bolt into the t-slots of your Front Runner roof rack. nUsed to mount a Hi-Lift Jacks to the top of your rack. nFits all size Hi-Lift Jacks. nThe Handle Bracket opens to allow access to your Hi-Lift Jack. nMade from steel and finished with the same durable, weather resistant black powder coating as the Front Runner Racks. nThe Handle Bracket is lockable with the RRAC134.
    • Product code: JADA014
    • Make: FRONT RUNNER
    • Dimensions: 280x176x90
    • Weight: 2.500 Kg
    Suitable for the following vehicles: Engine Year
    Accesorios de rescate Pistas de rescate

    100.00

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Land Rover Defender (1983-2016) Rear Bumper Bracket For Hi-Lift Jack 1.2m (JALD001)

    So you don't have a roof rack on your Defender? Firstly, you should ask yourself, why? Don't fret though, you can still mount your Hi-Lift Jack to your Defender with this handy rear bumper bracket! nBlack powder coated high strength steel for extra resiliance against the elements. nTwo (2) piece bumper bracket to mount your Hi-lift Jack 1.2M onto the rear bumper of your Land Rover Defender. nLockable - you supply the padlock. nEasy access to your Hi-Lift Jack, no ladders needed. nBest of all, this bracket adds a mean street appeal to your Defender's over all look.
    • Product code: JALD001
    • Make: FRONT RUNNER
    • Dimensions: 263x173x90
    • Weight: 1.500 Kg
    Suitable for the following vehicles: Engine Year
    Accesorios de rescate Pistas de rescate

    74.79

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • 20l Fuel Jerry Can - Black Steel Finish (JCFU001)

    The highest quality Jerry can out there. Manufactured from 0.8mm Steel. Dual pan construction. Seam welded for extra strength. Three Handle Configuration. Leak-proof Bayonet Closure. Locking pin in cap. Strengthened hinge on cap to prevent accidental bending when closing. Lined inside with petrol-resistant enamel to prevent rusting. Black painted exterior. For easy pouring JCFU006 is recommended. *sold separately Stores snug in Front Runner's JCHO013 or JCHO014 *sold separately Note: This Jerry can is not designed to carry water. For a water solution please use WTAN073 or WTAN070.
    • Product code: JCFU001
    • Make: FRONT RUNNER
    • Dimensions: 470x340x170
    • Weight: 4.000 Kg
    Suitable for the following vehicles: Engine Year
    Combustible Bidón Jerry y soportes

    46.22

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Fuel Jerry Can Lid Seal (JCFU002)

    A replacement rubber seal that fits into the lid of your Front Runner 20L Black Metal Fuel Jerry Can, preventing leakage.
    • Product code: JCFU002
    • Make: FRONT RUNNER
    • Dimensions: 50x45x0.5
    Suitable for the following vehicles: Engine Year
    Combustible Bidón Jerry y soportes

    5.87

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Fuel Jerry Can Spout (JCFU006)

    A metal spout with rubber nozzle that fits onto the Front Runner 20L Fuel Jerry Can. nBlack painted for added protection and aesthetic purposes. nClips easily onto Front Runner 20L Fuel Jerry Can. nSoft nozzle prevents damage to your vehicle.
    • Product code: JCFU006
    • Make: FRONT RUNNER
    • Dimensions: 310x80x70
    • Weight: 0.200 Kg
    Suitable for the following vehicles: Engine Year
    Combustible Bidón Jerry y soportes

    26.88

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Single Jerry Can Holder (JCHO013)

    nThe adjustable stainless steel latch with safety catch holds your Jerry Can firmly in place over a lifetime of off-road abuse. nFor use with 20l / 5.3 gallon NATO/Wedco style military cans. nThis strap covers the Jerry can cap. Add your own cable lock or RRAC134 and you'll never have to worry about stolen fuel while on the road. nMade of black powder coated high strength steel and designed to easily bolt to the Front Runner Roof Racks using the flat slotted slats in the rack. nNote: Not suitable for Scepter style containers.
    • Product code: JCHO013
    • Make: FRONT RUNNER
    • Dimensions: 540x370x65
    • Weight: 2.700 Kg
    Suitable for the following vehicles: Engine Year
    Combustible Bidón Jerry y soportes

    66.39

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Double Jerry Can Holder (JCHO014)

    nThe adjustable stainless steel latch with safety catch holds your Jerry Cans firmly in place over a lifetime of off-road abuse. nFor use with 20l / 5.3 gallon NATO/Wedco style military cans. nThis strap covers the Jerry can caps. Add your own cable lock or RRAC134 and you'll never have to worry about stolen fuel while on the road. nMade of black powder coated high strength steel and designed to easily bolt to the Front Runner Roof Racks using the flat slotted slats in the rack. nNote: Not suitable for Scepter Style containers.
    • Product code: JCHO014
    • Make: FRONT RUNNER
    • Dimensions: 538x337x60
    • Weight: 4.400 Kg
    Suitable for the following vehicles: Engine Year
    Combustible Bidón Jerry y soportes

    116.81

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Double Jerry Can Holder Replacement Strap (JCHO015)

    nA replacement top strap for the JCHO014 that securely fastens your Jerry Cans for a no rattle, no wear solution. nThis strap covers the Jerry cans caps. nFeatures a stainless steel cross brace and safety catch. Add your own padlock or RRAC134 and you'll never have to worry about stolen fuel while on the road. nMade of black powder coated stainless steel.
    • Product code: JCHO015
    • Make: FRONT RUNNER
    • Dimensions: 520x310x42
    • Weight: 1.600 Kg
    Suitable for the following vehicles: Engine Year
    Combustible Bidón Jerry y soportes

    66.39

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Land Rover Defender (1983-2016) Side Mount Jerry Can Holder (JCHO017)

    nThe adjustable stainless steel latch with safety catch holds your Jerry Can firmly in place over a lifetime of off-road abuse. nFor use with 20l / 5.3 gallon NATO/Wedco style military cans. nThis strap covers the Jerry can cap. Add your own padlock or RRAC134 and you'll never have to worry about stolen fuel while on the road. nSimple installation that uses an existing pop-rivet hole. nMade of durable black powder coated high strength steel and designed to mount to the rain gutter on vehicles like the classic Land Rovers. nNote: Will not work with Scepter style cans.Note: This Jerry Can Holder is not compatible with the Land Rover New Defender.
    • Product code: JCHO017
    • Make: FRONT RUNNER
    • Dimensions: 930x480x150
    • Weight: 7.600 Kg
    Suitable for the following vehicles: Engine Year
    Combustible Bidón Jerry y soportes

    189.08

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Land Rover Defender Side Mount Jerry Can Holder Spare Strap (JCHO018)

    nA replacement top strap for the JCHO017 that securely fastens your Jerry Can for a no rattle, no wear solution. nThis strap covers the Jerry Can cap. nFeatures a stainless steel safety catch. Add your own padlock or RRAC134 and you'll never have to worry about stolen fuel while on the road. nMade of black powder coated stainless steel.
    • Product code: JCHO018
    • Make: FRONT RUNNER
    • Dimensions: 395x115x40
    • Weight: 0.300 Kg
    Suitable for the following vehicles: Engine Year
    Combustible Bidón Jerry y soportes

    6.71

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Vertical Jerry Can Holder (JCHO019)

    nThe adjustable stainless steel latch with safety catch holds your Jerry Can firmly in place over a lifetime of off-road abuse. nFor use with 20l / 5.3 gallon NATO/Wedco style military cans. nThis strap covers the Jerry Can cap. Add your own padlock or RRAC134 and you'll never have to worry about stolen fuel while on the road. nMade of black powder coated stainless steel. nNot Suitable for Roof Rack fitment. nNOTE: Not suitable for Scepter style containers.
    • Product code: JCHO019
    • Make: FRONT RUNNER
    • Dimensions: 545x435x261
    • Weight: 5.300 Kg
    Suitable for the following vehicles: Engine Year
    Combustible Bidón Jerry y soportes

    125.21

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Vertical Jerry Can Holder Spare Strap (JCHO020)

    nA replacement top strap for the JCHO019 that securely fastens your Jerry Cans for a no rattle, no wear solution. nThis strap covers the jerry can caps. nFeatures a stainless steel safety catch. Add your own padlock or RRAC134 and you'll never have to worry about stolen fuel while on the road. nMade of black powder coated stainless steel.
    • Product code: JCHO020
    • Make: FRONT RUNNER
    • Dimensions: 400x40x80
    • Weight: 0.600 Kg
    Suitable for the following vehicles: Engine Year
    Combustible Bidón Jerry y soportes

    27.72

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Land Rover Defender 90/110 (1983-2016) Station Wagon Spare Wheel Carrier (RBLD001)

    A spare wheel carrier that mounts onto your Land Rover Defender 90 amp 110 Station Wagon and keeps that spare wheel safe and secure.
    • Product code: RBLD001
    • Make: FRONT RUNNER
    • Dimensions: 1030x750x275
    • Weight: 20.400 Kg
    Suitable for the following vehicles: Engine Year
    Neumáticos Land Rover

    646.22

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Land Rover Defender 130 (1983-2016) Pickup Spare Wheel Carrier (RBLD002)

    nA spare wheel carrier for the Land Rover Defender 130/DC Pickup. nAllows fitment of an additional spare wheel to the rear of the vehicle. nSecures to the chassis and the load bed body with supplied brackets and hardware. nThe spare wheel can then swing open to allow the tail gate to be opened. nLoad capacity 60kg (132.3lbs)
    • Product code: RBLD002
    • Make: FRONT RUNNER
    • Dimensions: 1030x750x275
    • Weight: 21.800 Kg
    Suitable for the following vehicles: Engine Year
    Neumáticos Land Rover

    688.24

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Maxtrax MKII / Orange (REQU119)

    These advanced 4WD, lightweight and tough MAXTRAX MKII recovery devices use integrated teeth that grip into a tyre's/tire's tread to provide traction in sand, mud or snow.
    • Product code: REQU119
    • Make: FRONT RUNNER
    • Dimensions: 1150x70x350
    • Weight: 7.000 Kg
    Suitable for the following vehicles: Engine Year
    Accesorios de rescate Pistas de rescate

    251.26

    Price Without VAT

    -+

    Delivery in 24/48h

  • TYREinflate 830 (REQU329)

    nThe OSRAM TYREinflate 830 has been specially developed for use with larger vehicles and their tyres, making it ideal for cars, caravans, motorhomes, off-road vehicles, minibuses and vans.  nThis tyre inflator can inflate a 13'' tyre in approx. 2 minutes and a 22'' tyre in approx. 5 minutes.  nThe auto stop function and the deflator valve help to keep the tyres optimally inflated.  nThis can also reduce the risk of over- or under-inflation and the resulting possible damage to the tyres.  nThe TYREinflate 830 has a 4-metre power cable for the accessibility to all four tyres and plugs directly into your vehicle's 12-volt socket.  nThe backlit LED display and integrated LED light provide improved readability of the pressure settings and improved illumination of the working area even in reduced visibility conditions or at night.  nAlso included are three adapters for inflating sports balls and other small inflatables and a storage bag to protect the unit and store it neatly. nOSRAM offers a 2-year guarantee on this product. nBased on inflating a 13” tyre from flat to 2.4 BAR /22” tyre from flat to 2.6 bar. nMeasurements of the tyre pressure and inflation of the tyres to the optimum tyre pressure must always be conducted on cold tyres.
    • Product code: REQU329
    • Make: OSRAM
    • Dimensions: 300x125x190
    • Weight: 2.600 Kg

    79.75

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • TYREinflate 6000 (REQU331)

    nCordless and rechargeable tyre inflator, ideal for camping and road trips. Rechargeable Li-ion battery.   nIncludes mains charger, plus 12V cable to power direct from in-car 12V socket if needed. nVersatile Inflator for versatile applications nCan inflate a 13'' tyre in approximately 2 minutes. nQuick and efficient inflation of tyres. nAuto-stop function. nQuick to set with auto stop at the target pressure. For correct inflation of tyres and less risk of over or under inflation. nPowerful LED light, Large backlit digital screen. nEasy control of the inflation process. Improved reading and pressure settings with illumination in dark environments. nPowerbank function and 10 piece accessory/adaptor kit. nEnables you to use the product across a multitude of inflatables and charge your phone and other.
    • Product code: REQU331
    • Make: OSRAM
    • Dimensions: 340x303x420
    • Weight: 7.700 Kg

    79.75

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Black Tie Down Rings / Eye Nuts (RRAC012)

    The must have item to experience the full potential of the Front Runner Rack. These easy to use tie down rings quickly and easily mount to a Front Runner Rack via the t-slots on the top, the bottom, and the side rails of the rack. No tools required. Just hand tighten. Slide these around anywhere on the rack for an endless supply of tie down points. Perfect for use with the Front Runner STRA034 or any style tie down strap. Mount unusual loads securely to a Rack for hassle free/rattle free travels where a specific mounting accessory is not available. Of all the accessories for the Front Runner Racks this is THE must have. Sold in pairs.
    • Product code: RRAC012
    • Make: FRONT RUNNER
    • Dimensions: 162x100x20
    • Weight: 0.200 Kg
    Suitable for the following vehicles: Engine Year
    Sistemas de Almacenamiento Amarre y aseguramiento

    11.76

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Rack Adaptor Plates For Thule Slotted Load Bars (RRAC017)

    nThese adaptor plates give you the ability to attach 2 Thule slotted Load Bars or Aero Bars to a Front Runner Slimline II Roof Rack.  n  nIf you currently own Thule Accessories and would like to use them with a Front Runner Slimline II Roof Rack, you can use your Thule load bars or Aero Bars to mount your accessories (e.g. Bike Mounts or Kayak mounts) to the rack. n  nWorks with both the SLOTTED-SQUARE and AERO Thule Load Bars.  This adapter plate DOES NOT work with the Thule rectangular load bars that do not have slots (ie. the basic Thule load bar found in the USA.)   n  Steel. n  nBlack powder coated. n  nMounts onto individual slats via the T-slot system. n  nT-slot bolts included. n  nPre-cut fitment holes. n
    • Product code: RRAC017
    • Make: FRONT RUNNER
    • Dimensions: 335x160x95
    • Weight: 2.200 Kg
    Suitable for the following vehicles: Engine Year
    Componentes / Spare Parts

    66.39

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Stainless Steel Tie Down Rings (RRAC025)

    These easy to use tie down rings quickly and easily mount to the t-slots on the top, sides and/orthe bottom of Front Runner Racks. Sold in Pairs. n No tools required. Just hand tighten. Slide these around anywhere on the rack for an endless supply of tie down points. Perfect for use with the Front Runner Stratchit or any style tie down strap. Mount unusual loads securely to your Rack for hassle free/rattle free travels where a specific mounting accessory is not available. nOf all the accessories for Front Runner Racks, thisis THE must have.
    • Product code: RRAC025
    • Make: FRONT RUNNER
    • Dimensions: 170x100x15
    • Weight: 0.100 Kg
    Suitable for the following vehicles: Engine Year
    Sistemas de Almacenamiento Amarre y aseguramiento

    13.44

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Pro Surfboard, Windsurf AND Paddle Board Carrier (RRAC052)

    Made of stainless steel and sealed with the same durable, weather rated powder coating as the Front Runner Slimline Roof Racks. n  nThe ultra dense yet soft weather resistant rubber pads cradle your valuable gear without harming or scratching the surfaces. n  nThe Stratchit strap’s clever cinching system mean easy-on and easy-off secure transport every time.  n  nAdjustable to hold all shapes and lengths of boards across the width and length of Front Runner Slimline Roof Racks or Front Runner Load Bars. n  nEach Front Runner Board Carrier can hold 1 to 2 boards.  n  nMost Front Runner Roof Racks and Load Bar widths will accommodate a 2nd Front Runner Board Carrier to hold up to 4 boards.  n  n  nIncludes: n2 pairs of board holders n1 pair of Front Runner Stratchits nAll hardware necessary to mount to a Slimline Roof Rack, Load Bars, or other flat surface.  nInstallation Manual nMade in South Africa
    • Product code: RRAC052
    • Make: FRONT RUNNER
    • Dimensions: 370x330x80
    • Weight: 3.500 Kg
    Suitable for the following vehicles: Engine Year
    Sport Surf

    172.27

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Canoe/Kayak or Surf Board Carrier Replacement Foam Set (RRAC076)

    ​These high density foam inserts with self adhesive backing make for an easy switch-out when the originals give in.Always ensuring protection of your valuable surfboard, canoe or kayak.
    • Product code: RRAC076
    • Make: FRONT RUNNER
    • Dimensions: 285x250x30
    • Weight: 0.100 Kg
    Suitable for the following vehicles: Engine Year
    Sport Remo

    15.96

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Vertical Surfboard Carrier (RRAC095)

    These two movable holders securely clamp your surfboard in-place vertically on either side of a Front Runner Slimline II Rack for easy transportation to free up room for other gear like Roof Top Tents, Kayaks, bikes, water and fuel, etc. nAdjust the holders along the length of the rack to accommodate various size boards. n2 supplied Front Runner Stratchits hold the Surfboard snug against padded side rests. The Stratchit straps clever cinching system provide easy-on and easy-off secure transport every time. nThe vertical holders can be folded down and stored flat against the rack top. nIf space on the rack top is available, the holders can be used in their flat “horizontal” positions to mount a surfboard or other larger boards for SUP or wind surfing. nEach vertical holder and side rest has soft touch foam padding to cradle your valuable gear without harming or scratching the surfaces. The Soft touch pads are made from a weather resistant cross-linked, closed cell Polyethylene. nIncluded rubber pads provide further protection between your board and the Front Runner Stratchit straps. nThe brackets are made from steel and sealed with the same durable, weather resistant black powder coating as the Front Runner Slimline II Roof Racks. nIn the vertical position the holders measure 400mm (15.8'') high from the underside of the Slimline II Rack Tray. When folded flat in the locked horizontal position the holders measure 45mm high from the underside of the Slimline II Rack Tray. nCan be used with Front Runner Slimline II Roof Racks, Bed Racks and Trailer Racks. nEasily bolts to your Slimline II Rack with supplied hardware. nIncludes all necessary installation hardware and fitting instructions.
    • Product code: RRAC095
    • Make: FRONT RUNNER
    • Dimensions: 650x160x130
    • Weight: 3.600 Kg
    Suitable for the following vehicles: Engine Year
    Sport Surf

    247.90

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • GoPro Rack Mounting Bracket (RRAC098)

    This Front Runner bracket allows you to mount your GoPro action camera effortlessly and quickly to your Slimline II roof rack or load bars. n  nBolts into the side profile channel of the Slimline II rack or your racks slats’ T-slot. nMade from 3mm steel. nBlack powder coated in the same resistant coating as the Slimline II rack. nAllows your camera to be adjusted to the required angle using the 3-Way Pivot Arm* (not included) which attaches to the Front Runner Rack Mount Bracket. n*GoPro/GoPro Housing and Pivot Arm are not included
    • Product code: RRAC098
    • Make: FRONT RUNNER
    • Dimensions: 120x90x60
    • Weight: 0.100 Kg
    Suitable for the following vehicles: Engine Year
    Sport Bicicleta

    5.03

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Land Rover Discovery LR3/LR4 Wind Fairing (RRAC102)

    nMoves air up and over the rack and accessories, reducing drag and wind noise created by the flow of air over your rack. nImproves fuel consumption. nSecurely mounts to Slimline II rack and extends to the Discovery LR3/LR4's roof. nAn additional rubber blade is fitted to the bottom edge of the Wind Fairing to seal any gaps and act as a roof guard when traveling over rough terrain. nA clear protective strip for the roof is included that stops any scuffing caused by dust.
    • Product code: RRAC102
    • Make: FRONT RUNNER
    • Dimensions: 1450x255x50
    • Weight: 2.300 Kg
    Suitable for the following vehicles: Engine Year
    Wind Deflector Land Rover

    113.45

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Recovery Device AND Gear Holding Side Brackets (RRAC103)

    nThese off-road tough brackets securely mount MAXTRAX, TRED Pro and other similar hole spacing recovery devices to the side profile of a Front Runner Slimline II Rack. nAlso use for mounting the RRAC149 (sold separately). nAdjustable in height and angle to compliment various vehicle profiles. nIncludes 2 types of bolts for holding either 1 or 2 pairs of MAXTRAX/TRED Pro. nBuilt to mount to the side profiles of a Slimline II roof rack but are also compatible with the original Slimline rack. nFinished with the same durable, weather resistant black powder coating as the Slimline II Rack. nThe included bolts can be substituted with the REQU120 (sold separately) to lock MAXTRAX in place. nNote: REQU259 is required when mounting 2 pairs of MAXTRAX EXTREME.Note: For compatibility with the Slimsport or Slimpro Van Rack the RRAC182, is required. *sold separately
    • Product code: RRAC103
    • Make: FRONT RUNNER
    • Dimensions: 310x160x90
    • Weight: 2.800 Kg
    Suitable for the following vehicles: Engine Year
    Accesorios de rescate Pistas de rescate

    133.61

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Rotopax Side and Top Mount Kit (RRAC112)

    nFree up rack space and mount fuel and water to the side or top of a Slimline II Rack. nThe high strength steel Mounting Plate can hold either one (1) 15L/4 gallon or two (2) 7.5L/2 gallon RotoPax Fuel, Water or Emergency/Storage Packs on the top of the rack or using the Side Mount Brackets, off the side of the rack. nThe Side Mount Brackets hold the Mounting Plate and are height (50mm/1.96'')) and tilt (12.5 degree increments up to 25 degrees) adjustable. nAllows for RotoPax Packs to be positioned to suit the vehicle profile and rack contents. Also allows the RotoPax Packs to be slanted when fitted to the side of a Front Runner load bed rack, so as not to protrude excessively from the vehicle.  nRRAC157 measures in at 480mm (18.9'') L x 250mm (9.8'') W x 20mm (0.8'') H, weighs 1,58kg (3.5lbs). nBoth the Side Mounting Plate and Side Mount Brackets are finished in the same durable, weather resistant black powder coating as the Slimline II Rack. nInstallation hardware and fitting instructions included. nPLEASE NOTE: RotoPax Pack Mounts (RX-PM, RX-DLX-PM and RX-LOX-PM) must be used to secure RotoPax to the Front Runner Rotopax Side Mount. The RotoPax brand Pack Mounts are SOLD SEPARATELY.Note: For compatibility with the Slimsport or Slimpro Van Rack the RRAC182, is required. *sold separately
    • Product code: RRAC112
    • Make: FRONT RUNNER
    • Dimensions: 534x365x150
    • Weight: 3.500 Kg
    Suitable for the following vehicles: Engine Year
    Expedición Expedición

    125.21

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Rack Pad Set (RRAC125)

    Don’t risk your expensive and fragile cargo on unpadded bars. Protect against dings and scratches so you can adventure worry free. nQuickly attach or remove the pads with the heavy-duty Velcro closure system. nPads secure around any standard Rack Slat or Load Bar.  nFor use at the front or rear on the Combined Slat of a Front Runner Rack, secure the pads using RRAC012 - SOLD SEPARATELY.  nUse STRA034 or other tie down straps to quickly and easily tie-down your gear. STRA034 are SOLD SEPARATELY.  nFirm foam for long-lasting reliability. nWide 24 inch / 61 cm pads for a range of uses and extra protection. nMade with water resistant and durable outdoor grade fabrics. nSet of 2 comes with nylon mesh bag for neat organization when not in use. nCan adjust to fit many other factory racks and load bars. nNote: This product is not compatible with Slimsport rack kit range.
    • Product code: RRAC125
    • Make: FRONT RUNNER
    • Dimensions: 610x355.6x152.5
    • Weight: 0.500 Kg
    Suitable for the following vehicles: Engine Year
    Sport Surf

    54.62

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Pro Canoe / Kayak / SUP Carrier (RRAC137)

    Fits most size canoes, kayaks, SUPs and surf skis. The space between the brackets is only limited by the length of your Front Runner Roof Rack or distance between your Load Bars. nHighly adjustable brackets allow for multiple mounting angles for your canoe, kayak or SUP. nThe foam-padded holders are self-adjusting for the perfect fit to the hull of your boat. nThe dense weather-resistant open cell foam pads are covered with a water-repellent polyester cover that is UV stabilized to prevent fading. nPads can be easily replaced if damaged in any way.  nToys are secured to the Canoe / Kayak / SUP Carrier using the supplied Front Runner STRA034 straps and eye nuts. nThe included Front Runner adjustable and stretchable STRA034 are the perfect tie-down for serious cargo. nThe quick and efficient straps will keep loads stable and secure without damaging surfaces and are rated up to 300 lbs. nThe Stratchit's clever cinching system creates an easy-on, and easy-off, secure transport every time. nComplete kit includes everything necessary to secure your water toys to Front Runner Roof Racks or Load Bars. nWeight limit: 60kg (132 lbs).
    • Product code: RRAC137
    • Make: FRONT RUNNER
    • Dimensions: 920x210x101
    • Weight: 6.700 Kg
    Suitable for the following vehicles: Engine Year
    Sport Remo

    352.10

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Pro Canoe AND Kayak Carrier Spare Pad Set (RRAC138)

    nFirm 100% polyethylene open cell foam for long-lasting reliability. nMade with water-resistant and UV protected outdoor grade fabrics. nThe heavy-duty Velcro closure system allows for quick attachment or removal. nPads secure around the RRAC137. nA single carrier bracket provides a wide 600mm / 23.6'' surface for a range of uses and extra protection. nSold in pairs.
    • Product code: RRAC138
    • Make: FRONT RUNNER
    • Dimensions: 290x160x60
    • Weight: 0.400 Kg
    Suitable for the following vehicles: Engine Year
    Sport Remo

    30.24

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Cargo Roller (RRAC141)

    nThe Front Runner Cargo Roller fits a Front Runner rack for easy loading and unloading of long or heavy items. nHelpful for loading and unloading kayaks and canoes as well as tradesman items like lumber and building supplies. nCan be fitted onto one slat at the rear of rack or across slats on the side of the rack. nAt 496mm (19.5'') long, the roller accommodates most load sizes. To create an even wider rolling surface (i.e. for plywood or sheetrock) two rollers can be installed directly next to each other. nEach roller bracket set features 4 tie-down points for Front Runner STRA034 or other straps. nThe roller has a nylon bearing housing. These weather resistant, non-corrosive, maintenance-free inserts will offer trouble-free spinning for years to come. nEach roller has a soft rubber surface to prevent damage to high-value items. nComes complete with mounting hardware and fitting instructions. nMade in South Africa. n*Not sold in pairs.
    • Product code: RRAC141
    • Make: FRONT RUNNER
    • Dimensions: 535x90x80
    • Weight: 2.100 Kg
    Suitable for the following vehicles: Engine Year
    Sport Remo

    79.83

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Wind Fairing for Rack / 1165mm/1255mm(W) (RRAC143)

    nGet a bold new overlanding look in minutes. nCreate a solid appearance by covering the gap from roof to rack. nAir flows easily over the rack and accessories, reducing drag and wind noise.  nHelps fuel consumption while carrying bulky loads. nEasily secures to your roof rack in three simple steps. nAdjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. nA durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. nAn optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust. nNote: This Wind Fairing is not suitable for the Toyota Rav4 Adventure ModelsNote: RRAC124 are not compatible with this Wind Fairing. May interfere with sunroof operation on some vehicles.
    • Product code: RRAC143
    • Make: FRONT RUNNER
    • Dimensions: 1460x250x50
    • Weight: 3.400 Kg
    Suitable for the following vehicles: Engine Year
    Wind Deflector Universales

    142.02

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Wind Fairing for Rack / 1345mm/1425mm(W) (RRAC144)

    nGet a bold new overlanding look in minutes. nCreate a solid appearance by covering the gap from roof to rack. nAir flows easily over the rack and accessories, reducing drag and wind noise.  nHelps fuel consumption while carrying bulky loads. nEasily secures to your roof rack in three simple steps. nAdjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. nA durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. nAn optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust. nPlease Note: Not suitable for Jeep Wrangler JK, JL or JT.May interfere with sunroof operation on some vehicles.
    • Product code: RRAC144
    • Make: FRONT RUNNER
    • Dimensions: 1460x250x50
    • Weight: 3.600 Kg
    Suitable for the following vehicles: Engine Year
    Wind Deflector Universales

    150.42

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Wind Fairing for Rack / 1475mm(W) (RRAC145)

    nGet a bold new overlanding look in minutes. nCreate a solid appearance by covering the gap from roof to rack. nAir flows easily over the rack and accessories, reducing drag and wind noise.  nHelps fuel consumption while carrying bulky loads. nEasily secures to your roof rack in three simple steps. nAdjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. nA durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. nAn optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust. nNote: May interfere with sunroof operation on some vehicles.
    • Product code: RRAC145
    • Make: FRONT RUNNER
    • Dimensions: 1450x250x50
    • Weight: 3.700 Kg
    Suitable for the following vehicles: Engine Year
    Wind Deflector Universales

    158.82

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Recovery Device Mounting Kit (RRAC147)

    nFasten the recovery devices to the Slimline II Rack using the t-slot system and included hardware. nMounts front to back or side to side on the rack with a low profile. nIncludes 2 threaded keys to allow fitment of either 1 or 2 pairs of TRED or TRED Pro recovery tracks. nAlso includes 4 eye-nuts and stainless steel hardware for fitment of MAXTRAX recovery tracks. nAdd STRA034 (Sold Separately) to secure other gear on top of the recovery device(s).
    • Product code: RRAC147
    • Make: FRONT RUNNER
    • Dimensions: 370x330x80
    • Weight: 4.200 Kg
    Suitable for the following vehicles: Engine Year
    Accesorios de rescate Pistas de rescate

    150.42

    Price Without VAT

    -+

    Delivery in 7-8 work days