EIGAS Automoción Logo

  • Land Allmakes4x4
  • Bearmach Logo

Roof Racks

Filter by vehicle
Sort by:

  • Gullwing Hinge (GWHG001)

    nA T-Hinge that is compatible with your Gullwing Window nMade of die-cast zinc and powder-coated black to match Front Runner products
    • Product code: GWHG001
    • Make: FRONT RUNNER
    • Dimensions: 175x150x40
    • Weight: 0.200 Kg
    Suitable for the following vehicles: Engine Year
    Componentes para baca Recambios

    36.13

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Audi A4 Allroad (2009-2016) Slimline II Roof Rail Rack Kit (KRAA001T)

    This 1358mm/53.5'' long full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 pairs of Rail Grip Feet to mount the Slimline II Tray to the roof rails of your Audi A4 Allroad. This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling required. nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. nNOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. nThis rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. nAll Front Runner Racks are backed by a Limited Lifetime Warranty* nFactory Rail Rack Kits are designed as a ''light duty'' cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits. nFor optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. nFactory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. nPlease contact us for advice on specific mounting solutions for your vehicle and use. nNote: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly.
    • Product code: KRAA001T
    • Make: FRONT RUNNER
    • Dimensions: 1730x445x150
    • Weight: 24.000 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II AUDI

    873.11

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Audi A6 (2019-Current) Slimline II Roof Rail Rack Kit (KRAA002T)

    This 1358mm/53.5'' long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 2 pairs of Rail Grip Feet to mount the Slimline II Tray to the roof rails of your Audi A6. This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling is required. nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. nNOTE: Your vehicle must be equipped with the factory/OEM roof rails to use this rack kit. nThis rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. nFor a stronger expedition-grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. nAll Front Runner Racks are backed by a Limited Lifetime Warranty* nFactory Rail Rack Kits are designed as a ‘light duty’ cargo solution. Please refer to your vehicle's owner manual for the manufacturer’s recommended load rating and do not exceed these limits. nFor optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and that all weight is distributed evenly across the rack. nFactory Rail Rack Kits are not suited for extreme off-road conditions therefore, you should consider a different Front Runner mounting solution if this is your intended purpose. nPlease contact us for advice on specific mounting solutions for your vehicle and use. nNote: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly.
    • Product code: KRAA002T
    • Make: FRONT RUNNER
    • Dimensions: 1730x440x170
    • Weight: 30.000 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II AUDI

    962.18

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Audi E-TRON (2020-Current) Slimline II Roof Rail Rack Kit (KRAE001T)

    This 1358mm/53.5'' long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Rail Grip Feet to mount the Slimline II Tray to the roof rails of your Audi E-TRON. This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling is required. nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. nNOTE: Your vehicle must be equipped with the factory/OEM roof rails to use this rack kit. nThis rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. nFor a stronger expedition-grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. nAll Front Runner Racks are backed by a Limited Lifetime Warranty* nFactory Rail Rack Kits are designed as a ''light duty'' cargo solution. Please refer to your vehicle's owner manual for the manufacturers’ recommended load rating and do not exceed these limits. nFor optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and that all weight is distributed evenly across the rack. nFactory Rail Rack Kits are not suited for extreme off-road conditions therefore, you should consider a different Front Runner mounting solution if this is your intended purpose. nPlease contact us for advice on specific mounting solutions for your vehicle and use. nNote: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly.
    • Product code: KRAE001T
    • Make: FRONT RUNNER
    • Dimensions: 1730x440x170
    • Weight: 29.000 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II AUDI

    957.14

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Audi Q3 (2011-Current) Slimline II Roof Rail Rack Kit (KRAQ001T)

    This 1156mm/45.5'' long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Rail Grip Feet to mount the Slimline II Tray to the roof rails of your Audi Q3 (8U). This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling required. nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition.For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted.All Front Runner Racks are backed by a Limited Lifetime Warranty* nFactory Rail Rack Kits are designed as a ''light duty'' cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits. nFor optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. nFactory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. nPlease contact us for advice on specific mounting solutions for your vehicle and use. nNote: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly.
    • Product code: KRAQ001T
    • Make: FRONT RUNNER
    • Dimensions: 1730x450x140
    • Weight: 20.600 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II AUDI

    852.94

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Audi Q5 (2009-Current) Slimline II Roof Rail Rack Kit (KRAQ002T)

    This 1358mm/53.5'' long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Rail Grip Feet to mount the Slimline II Tray to the roof rails of your Audi Q5 (8R). This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling required. nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition.For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted.All Front Runner Racks are backed by a Limited Lifetime Warranty* nFactory Rail Rack Kits are designed as a ''light duty'' cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits. nFor optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. nFactory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. nPlease contact us for advice on specific mounting solutions for your vehicle and use. nNote: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly.
    • Product code: KRAQ002T
    • Make: FRONT RUNNER
    • Dimensions: 1730x450x140
    • Weight: 26.500 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II AUDI

    962.18

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Audi Q7 (4L) (2005-2010) Slimline II Roof Rail Rack Kit (KRAQ003T)

    This 1358mm/53.5'' long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Rail Grip Feet to mount the Slimline II Tray to the roof rails of your Audi Q7 (4L). This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling required. nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition.For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted.All Front Runner Racks are backed by a Limited Lifetime Warranty* nFactory Rail Rack Kits are designed as a ''light duty'' cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits. nFor optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. nFactory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. nPlease contact us for advice on specific mounting solutions for your vehicle and use. nNote: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly.
    • Product code: KRAQ003T
    • Make: FRONT RUNNER
    • Dimensions: 1730x450x140
    • Weight: 27.700 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II AUDI

    1.024.37

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Audi Q8 (2020-Current) Slimline II Roof Rail Rack Kit (KRAQ005T)

    This 1358mm/53.5'' long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 2 pairs of Rail Grip Feet to mount the Slimline II Tray to the roof rails of your Audi Q8. This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling is required. nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. nNOTE: Your vehicle must be equipped with the factory/OEM roof rails to use this rack kit. nThis rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. nFor a stronger expedition-grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. nAll Front Runner Racks are backed by a Limited Lifetime Warranty* nFactory Rail Rack Kits are designed as a ''light duty'' cargo solution. Please refer to your vehicle's owner manual for the manufacturers’ recommended load rating and do not exceed these limits. nFor optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and that all weight is distributed evenly across the rack. nFactory Rail Rack Kits are not suited for extreme off-road conditions therefore, you should consider a different Front Runner mounting solution if this is your intended purpose. nPlease contact us for advice on specific mounting solutions for your vehicle and use. nNote: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly.
    • Product code: KRAQ005T
    • Make: FRONT RUNNER
    • Dimensions: 1730x440x180
    • Weight: 27.000 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II AUDI

    864.71

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Buick Encore (2013-Current) Slimline II Roof Rail Rack Kit (KRBE001T)

    This 1358mm/53.5'' long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Rail Grip Feet to mount the Slimline II Tray to the roof rails of your Buick Encore. This system installs easily off-road tough with feet that grip onto the existing factory/OEM roof rails. No drilling required. nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition.For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted.All Front Runner Racks are backed by a Limited Lifetime Warranty* nFactory Rail Rack Kits are designed as a ''light duty'' cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits. nFor optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. nFactory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. nPlease contact us for advice on specific mounting solutions for your vehicle and use. nNote: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly.
    • Product code: KRBE001T
    • Make: FRONT RUNNER
    • Dimensions: 1730x450x140
    • Weight: 24.500 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II BUICK

    889.92

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • BMW F31 (320d) (2012-2018) Slimline II Roof Rail Rack Kit (KRBF001T)

    This 1358mm/53.5'' long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 2 pairs of Rail Grip Feet to mount the Slimline II Tray to the roof rails of your BMW F31 (320d). This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling is required. nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. nNOTE: Your vehicle must be equipped with the factory/OEM roof rails to use this rack kit. nThis rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. nFor a stronger expedition-grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. nAll Front Runner Racks are backed by a Limited Lifetime Warranty* nFactory Rail Rack Kits are designed as a ''light duty'' cargo solution. Please refer to your vehicle's owner manual for the manufacturer’s recommended load rating and do not exceed these limits. nFor optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and that all weight is distributed evenly across the rack. nFactory Rail Rack Kits are not suited for extreme off-road conditions therefore, you should consider a different Front Runner mounting solution if this is your intended purpose. nPlease contact us for advice on specific mounting solutions for your vehicle and use. nNote: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly.
    • Product code: KRBF001T
    • Make: FRONT RUNNER
    • Dimensions: 1730x440x175
    • Weight: 26.000 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II BMW

    878.15

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • BMW X3 (2003-2010) Slimline II Roof Rail Rack Kit (KRBX001T)

    This 1560mm/61.4” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Feet to mount the Slimline II Tray to the roof rails of your BMW X3 (2003-2010). This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required. nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. nNOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. nThis rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. nFor a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. nFactory Rail Rack Kits are designed as a ''light duty'' cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits. nFor optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. nFactory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. nPlease contact us for advice on specific mounting solutions for your vehicle and use.All Front Runner Racks are backed by a Limited Lifetime Warranty* nNote: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly.
    • Product code: KRBX001T
    • Make: FRONT RUNNER
    • Dimensions: 1730x455x285
    • Weight: 26.200 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II BMW

    923.53

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • BMW X5 (2000-2013) Slimline II Roof Rail Rack Kit (KRBX002T)

    This 1560mm/61.4” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Feet to mount the Slimline II Tray to the roof rails of your BMW X5 (2000-2013). This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required. nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. nNOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. nThis rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. nFor a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. nFactory Rail Rack Kits are designed as a ''light duty'' cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits. nFor optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. nFactory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. nPlease contact us for advice on specific mounting solutions for your vehicle and use.All Front Runner Racks are backed by a Limited Lifetime Warranty* nNote: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly.
    • Product code: KRBX002T
    • Make: FRONT RUNNER
    • Dimensions: 1730x455x285
    • Weight: 26.200 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II BMW

    923.53

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • BMW X3 (2013-Current) Slimline II Roof Rail Rack Kit (KRBX003T)

    This 1156mm/45.5'' long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Rail Grip Feet to mount the Slimline II Tray to the roof rails of your BMW X3 (2013-Current). This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling required. nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition.For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted.All Front Runner Racks are backed by a Limited Lifetime Warranty*Factory Rail Rack Kits are designed as a ''light duty'' cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits. nFor optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. nFactory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. nPlease contact us for advice on specific mounting solutions for your vehicle and use. nNote: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly.
    • Product code: KRBX003T
    • Make: FRONT RUNNER
    • Dimensions: 1730x455x215
    • Weight: 23.900 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II BMW

    839.50

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • BMW X1 (2015-2022) Slimline II Roof Rail Rack Kit (KRBX004T)

    This 1156mm/45.5'' long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Rail Grip Feet to mount the Slimline II Tray to the roof rails of your BMW X1. This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling required. nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. nNOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. nThis rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. nAll Front Runner Racks are backed by a Limited Lifetime Warranty* nFactory Rail Rack Kits are designed as a ''light duty'' cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits. nFor optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. nFactory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. nPlease contact us for advice on specific mounting solutions for your vehicle and use. nNote: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly.
    • Product code: KRBX004T
    • Make: FRONT RUNNER
    • Dimensions: 1730x440x160
    • Weight: 22.600 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II BMW

    810.92

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • BMW X5 (2019-Current) Slimline II Roof Rail Rack Kit (KRBX005T)

    nThis 1358mm/53.5'' long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 6 Rail Grip Feet to mount the Slimline II Tray to the roof rails of your BMW X5. This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling is required. nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. nNOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit. nThis rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. nAll Front Runner Racks are backed by a Limited Lifetime Warranty* nFactory Rail Rack Kits are designed as a ''light duty'' cargo solution. Please refer to your vehicle's owner manual for the manufacturer's recommended load rating and do not exceed these limits. nFor optimal load-carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and that all weight is distributed evenly across the rack. nFactory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose. nPlease contact us for advice on specific mounting solutions for your vehicle and use. nNote: The load for Factory Rail Rack Kits must not exceed 88lbs or 40kg, and ensure the load is distributed evenly.
    • Product code: KRBX005T
    • Make: FRONT RUNNER
    • Dimensions: 1720x445x160
    • Weight: 28.000 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II BMW

    1.079.83

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer Slimline II Rack Kit / 1165mm(W) X 1358mm(L) (KRCA001T)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 1358mm/53.5'' (L). The Slimline II Tray mounts to six (6) supplied Feet that slide in to the supplied Track. The 1400mm/55.1'' long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details. nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA001T
    • Make: FRONT RUNNER
    • Dimensions: 1730x445x265
    • Weight: 29.000 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    920.17

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / 1165mm(W) X 1560mm(L) (KRCA001TN)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 1560mm/61.4'' (L). The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have: nSlot base width min 20mm / max 25mm nSlot base height min 6.5mm / max 10mm nSlot opening width min 8.5mm / max 10.5mm nSlot opening height min 2mm / max 5mm n**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA001TN
    • Make: FRONT RUNNER
    • Dimensions: 1730x445x150
    • Weight: 25.800 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    856.30

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer Slimline II Rack Kit / 1165mm(W) X 1156mm(L) (KRCA004T)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 1156mm/45.5'' (L). The Slimline II Tray mounts to four (4) supplied Feet that slide in to the supplied Track. The 1150mm/45.3'' long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA004T
    • Make: FRONT RUNNER
    • Dimensions: 1730x445x275
    • Weight: 23.200 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    780.67

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / 1165mm(W) X 1156mm(L) (KRCA004TN)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 1156mm/45.5'' (L). The Slimline II Tray and four (4) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have: nSlot base width min 20mm / max 25mm nSlot base height min 6.5mm / max 10mm nSlot opening width min 8.5mm / max 10.5mm nSlot opening height min 2mm / max 5mm n**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA004TN
    • Make: FRONT RUNNER
    • Dimensions: 1730x450x140
    • Weight: 20.700 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    684.87

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / 1165mm(W) X 1358mm(L) (KRCA005TN)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 1358mm/53.5'' (L). The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks. nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have: nSlot base width min 20mm / max 25mm nSlot base height min 6.5mm / max 10mm nSlot opening width min 8.5mm / max 10.5mm nSlot opening height min 2mm / max 5mm n**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA005TN
    • Make: FRONT RUNNER
    • Dimensions: 1730x445x150
    • Weight: 24.000 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    797.48

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Pickup Truck Canopy or Trailer Slimline II Rack Kit / 1345mm(W) X 954mm(L) (KRCA006T)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1345mm/53'' (W) x 954mm/37.6'' (L). The Slimline II Tray mounts to four (4) supplied Feet that slide in to the supplied Track. The 1000mm/39.4'' long pair of tracks can be easily mounted to your canopy/shell or trailer. See the Track installation instructions in the INSTALL tab for further details. n  nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. n  nAll Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA006T
    • Make: FRONT RUNNER
    • Dimensions: 1720x445x280
    • Weight: 24.000 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    789.08

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • RSI Double Cab Smart Canopy Slimline II Rack Kit / 1165mm(W) x 1358mm(L) (KRCA008T)

    This kit creates a full size rack on a RSI Canopy with a roof top size of approximately 1165mm/45.9'' (W) x 1358mm/53.5'' (L). The Slimline II Tray mounts to supplied Feet that slide in to the canopy track.nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: This Kit does not fit Volkswagen Amarok Double Cab Canopies. Please use KRCA077.
    • Product code: KRCA008T
    • Make: FRONT RUNNER
    • Dimensions: 1730x445x150
    • Weight: 24.200 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para remolques o Hard Top

    814.29

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / 1255mm(W) X 1358mm(L) (KRCA020TN)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1255mm/49.4'' (W) x 1358mm/53.5'' (L). The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have: nSlot base width min 20mm / max 25mm nSlot base height min 6.5mm / max 10mm nSlot opening width min 8.5mm / max 10.5mm nSlot opening height min 2mm / max 5mm n**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA020TN
    • Make: FRONT RUNNER
    • Dimensions: 1730x440x160
    • Weight: 24.800 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    839.50

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer Slimline II Rack Kit / 1255mm(W) x 1358mm(L) (KRCA021T)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1255mm/49.4'' (W) x 1358mm/53.5'' (L). The Slimline II Tray mounts to six (6) supplied Feet that slide in to the supplied Track. The 1400mm/55.1” long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details. nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA021T
    • Make: FRONT RUNNER
    • Dimensions: 1730x440x270
    • Weight: 29.000 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    962.18

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / 1255mm(W) X 1560mm(L) (KRCA021TN)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1255mm/49.4'' (W) x 1560mm/61.4'' (L). The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have: nSlot base width min 20mm / max 25mm nSlot base height min 6.5mm / max 10mm nSlot opening width min 8.5mm / max 10.5mm nSlot opening height min 2mm / max 5mm n**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA021TN
    • Make: FRONT RUNNER
    • Dimensions: 1730x440x160
    • Weight: 26.000 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    903.36

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / 1165mm(W) X 752mm(L) (KRCA023TN)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 752mm/29.6'' (L). The Slimline II Tray and four (4) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have: nSlot base width min 20mm / max 25mm nSlot base height min 6.5mm / max 10mm nSlot opening width min 8.5mm / max 10.5mm nSlot opening height min 2mm / max 5mm n**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track. All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA023TN
    • Make: FRONT RUNNER
    • Dimensions: 1730x1165x140
    • Weight: 17.300 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    542.02

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer Slimline II Rack Kit / 1165mm(W) X 752mm(L) (KRCA024T)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 752mm/29.6'' (L). The Slimline II Tray mounts to four (4) supplied Feet that slide in to the supplied Track. The 750mm/29.5'' long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details. nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA024T
    • Make: FRONT RUNNER
    • Dimensions: 1730x445x270
    • Weight: 20.600 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    612.61

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / 1165mm(W) X 954mm(L) (KRCA024TN)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 954mm/37.6'' (L). The Slimline II Tray and four (4) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have: nSlot base width min 20mm / max 25mm nSlot base height min 6.5mm / max 10mm nSlot opening width min 8.5mm / max 10.5mm nSlot opening height min 2mm / max 5mm n**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA024TN
    • Make: FRONT RUNNER
    • Dimensions: 1730x445x240
    • Weight: 18.800 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    612.61

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / 1165mm(W) X 1762mm(L) (KRCA025TN)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 1762mm/69.4'' (L). The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have: nSlot base width min 20mm / max 25mm nSlot base height min 6.5mm / max 10mm nSlot opening width min 8.5mm / max 10.5mm nSlot opening height min 2mm / max 5mm n**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA025TN
    • Make: FRONT RUNNER
    • Dimensions: 1730x445x160
    • Weight: 27.600 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    953.78

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer Slimline II Rack Kit / 1165mm(W) X 1762mm(L) (KRCA026T)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 1762mm/69.4'' (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide in to the supplied Track. The 1600mm/63'' long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details. nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA026T
    • Make: FRONT RUNNER
    • Dimensions: 1730x445x270
    • Weight: 32.800 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    1.113.45

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / 1165mm(W) X 1964mm(L) (KRCA026TN)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 1964mm/77.3'' (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have: nSlot base width min 20mm / max 25mm nSlot base height min 6.5mm / max 10mm nSlot opening width min 8.5mm / max 10.5mm nSlot opening height min 2mm / max 5mm n**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA026TN
    • Make: FRONT RUNNER
    • Dimensions: 1730x445x160
    • Weight: 30.000 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    1.057.98

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer Slimline II Rack Kit / 1165mm(W) X 2166mm(L) (KRCA027T)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 2166mm/85.3'' (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide in to the supplied Track. The 2 x 750mm/29.5'' long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA027T
    • Make: FRONT RUNNER
    • Dimensions: 1730x445x270
    • Weight: 34.200 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    1.281.51

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / 1165mm(W) X 2166mm(L) (KRCA027TN)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 2166mm/85.3'' (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have: nSlot base width min 20mm / max 25mm nSlot base height min 6.5mm / max 10mm nSlot opening width min 8.5mm / max 10.5mm nSlot opening height min 2mm / max 5mm n**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA027TN
    • Make: FRONT RUNNER
    • Dimensions: 1730x445x150
    • Weight: 31.800 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    1.133.61

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer Slimline II Rack Kit / 1165mm(W) X 2368mm(L) (KRCA028T)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 2368mm/93.2'' (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide in to the supplied Track. The 2 x 750mm/29.5'' long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA028T
    • Make: FRONT RUNNER
    • Dimensions: 1730x445x270
    • Weight: 36.800 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    1.352.10

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / 1165mm(W) X 2368mm(L) (KRCA028TN)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 2368mm/93.2'' (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have: nSlot base width min 20mm / max 25mm nSlot base height min 6.5mm / max 10mm nSlot opening width min 8.5mm / max 10.5mm nSlot opening height min 2mm / max 5mm n**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA028TN
    • Make: FRONT RUNNER
    • Dimensions: 1730x445x160
    • Weight: 33.000 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    1.205.88

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer Slimline II Rack Kit / 1165mm(W) X 2570mm(L) (KRCA029T)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 2570mm/101.2'' (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide in to the supplied Track. The 2 x 1150mm/45.3'' long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA029T
    • Make: FRONT RUNNER
    • Dimensions: 1730x445x270
    • Weight: 40.000 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    1.469.75

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / 1165mm(W) X 2570mm(L) (KRCA029TN)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 2570mm/101.2'' (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have: nSlot base width min 20mm / max 25mm nSlot base height min 6.5mm / max 10mm nSlot opening width min 8.5mm / max 10.5mm nSlot opening height min 2mm / max 5mm n**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA029TN
    • Make: FRONT RUNNER
    • Dimensions: 1730x445x160
    • Weight: 35.600 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    1.276.47

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer Slimline II Rack Kit / 1165mm(W) X 2772mm(L) (KRCA030T)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 2772mm/109.1'' (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide in to the supplied Track. The 2 x 1150mm/45.3'' long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA030T
    • Make: FRONT RUNNER
    • Dimensions: 1730x445x270
    • Weight: 41.800 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    1.542.02

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / 1165mm(W) X 2772mm(L) (KRCA030TN)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45.9'' (W) x 2772mm/109.1'' (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have: nSlot base width min 20mm / max 25mm nSlot base height min 6.5mm / max 10mm nSlot opening width min 8.5mm / max 10.5mm nSlot opening height min 2mm / max 5mm n**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA030TN
    • Make: FRONT RUNNER
    • Dimensions: 1730x445x160
    • Weight: 31.400 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    1.343.70

    Price Without VAT

    -+

    Delivery in 7-8 work days

  • Truck Canopy or Trailer Slimline II Rack Kit / 1255mm(W) X 752mm(L) (KRCA031T)

    This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1255mm/49.4'' (W) x 752mm/29.6'' (L). The Slimline II Tray mounts to four (4) supplied Feet that slide in to the supplied Track. The 750mm/29.5 long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.nAll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
    • Product code: KRCA031T
    • Make: FRONT RUNNER
    • Dimensions: 1730x445x270
    • Weight: 19.400 Kg
    Suitable for the following vehicles: Engine Year
    Baca de Techo Slimline II Para Capota

    646.22

    Price Without VAT

    -+

    Delivery in 7-8 work days