Name: Canopy Load Bar Kit / 1165mm (W)
Brand: FRONT RUNNER
SKU: KRCA007
Price: 301.68 EUR
Availability: LimitedAvailability

Canopy Load Bar Kit / 1165mm (W) (KRCA007)

« prev next »

A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 40mm Feet, 2 1165mm Load Bars, 2 1150mm Canopy Tracks, and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle. nnYou may not have the need for a full roof rack and find that you can get by using a set of Front Runner Load Bars.These Load Bars are mounted to the vehicle’s roof via a set of supplied Tracks and Track Mounted Feet.Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.Made from stainless steel and a durable, weather resistant black powder-coated aluminum.Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCA007
Brand: FRONT RUNNER
Packaging dimensions: 1545x115x245
Weight: 8.000 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Para remolques o Hard Top

301.68 €

Price Without VAT

RSI Double Cab Smart Canopy Load Bar Kit / 1255mm (KRCA008)

« prev next »

A set of Load Bars used to transport gear on the roof of your RSI Double Cab Smart Canopy. This low profile solution includes 4 mounting Feet, 2 1255mm Load Bars, installation kit and fitting instructions. nThese Load Bars are mounted to the RSC Double Cab Smart Canopy via a set of supplied Mounted Feet. nUses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nThe Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack. nMade from stainless steel and a durable, weather resistant black powder-coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCA008
Brand: FRONT RUNNER
Packaging dimensions: 1380x110x150
Weight: 5.600 Kg

Suitable for the following vehicles:	Engine	Year
Juego de barras de carga Universales

222.69 €

Price Without VAT

RSI Double Cab Smart Canopy Load Bar Kit / 1165mm (KRCA009)

« prev next »

A set of Load Bars used to transport gear on the roof of your RSI Double Cab Smart Canopy. This low profile solution includes 4 mounting Feet, 2 1165mm Load Bars, installation kit and fitting instructions. nThese Load Bars are mounted to the RSC Double Cab Smart Canopy via a set of supplied Mounted Feet. nUses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nThe Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack. nMade from stainless steel and a durable, weather resistant black powder-coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCA009
Brand: FRONT RUNNER
Packaging dimensions: 1280x110x145
Weight: 5.200 Kg

Suitable for the following vehicles:	Engine	Year
Específicas Vehículo Ford

214.29 €

Price Without VAT

Canopy Load Bar Kit / 1345mm (KRCA010)

« prev next »

nComes with all hardware and components needed to fit load bars on a vehicle, including four (4) mounting feet, two (2) 1345mm load bars, an installation kit and fitting instructions. nThese load bars are mounted to your canopy via a set of supplied mounted feet. nUses the same strong, corrosion-free aluminum slats found in Front Runner Slimline II Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nThe load bars and mounting system can be used in the future as components to build a complete Front Runner roof rack. nMade from steel and durable, weather-resistant black powder-coated aluminum. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCA010
Brand: FRONT RUNNER
Packaging dimensions: 1455x110x135
Weight: 5.200 Kg

Suitable for the following vehicles:	Engine	Year
Juego de barras de carga Universales

217.65 €

Price Without VAT

Canopy Load Bar Kit / 1475mm (KRCA011)

« prev next »

nComes with all hardware and components needed to fit load bars on a vehicle, including four (4) mounting feet, two (2) 1475mm load bars, an installation kit and fitting instructions. nThese load bars are mounted to your canopy via a set of supplied mounted feet. nUses the same strong, corrosion-free aluminum slats found in Front Runner Slimline II Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nThe load bars and mounting system can be used in the future as components to build a complete Front Runner roof rack. nMade from steel and durable, weather-resistant black powder-coated aluminum. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCA011
Brand: FRONT RUNNER
Packaging dimensions: 1585x110x135
Weight: 5.500 Kg

Suitable for the following vehicles:	Engine	Year
Juego de barras de carga Universales

231.09 €

Price Without VAT

Canopy Load Bar Kit / 1255mm (W) (KRCA012)

« prev next »

nComes with all hardware and components needed to fit load bars on your canopy, including four (4) mounting feet, two (2) 1255mm load bars, an installation kit and fitting instructions. nThese load bars are mounted to your canopy via a set of supplied mounted feet. nUses the same strong, corrosion-free aluminum slats found in Front Runner Slimline II Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nThe load bars and mounting system can be used in the future as components to build a complete Front Runner roof rack. nMade from steel and durable, weather-resistant black powder-coated aluminum. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCA012
Brand: FRONT RUNNER
Packaging dimensions: 1350x110x145
Weight: 6.000 Kg

Suitable for the following vehicles:	Engine	Year
Juego de barras de carga Universales

214.29 €

Price Without VAT

Canopy Load Bar Kit / 1425mm (W) (KRCA013)

« prev next »

nComes with all hardware and components needed to fit load bars on your Canopy, including four (4) mounting feet, two (2) 1425mm load bars, an installation kit and fitting instructions. nThese load bars are mounted to your canopy via a set of supplied mounted feet. nUses the same strong, corrosion-free aluminum slats found in Front Runner Slimline II Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nThe load bars and mounting system can be used in the future as components to build a complete Front Runner roof rack. nMade from steel and durable, weather-resistant black powder-coated aluminum. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCA013
Brand: FRONT RUNNER
Packaging dimensions: 1500x110x145
Weight: 6.000 Kg

Suitable for the following vehicles:	Engine	Year
Juego de barras de carga Universales

226.05 €

Price Without VAT

Canopy Load Bar Kit / 1575mm (W) (KRCA014)

« prev next »

nComes with all hardware and components needed to fit load bars on your Canopy, including four (4) mounting feet, two (2) 1575mm load bars, an installation kit and fitting instructions. nThese load bars are mounted to your canopy via a set of supplied mounted feet. nUses the same strong, corrosion-free aluminum slats found in Front Runner Slimline II Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nThe load bars and mounting system can be used in the future as components to build a complete Front Runner roof rack. nMade from steel and durable, weather-resistant black powder-coated aluminum. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCA014
Brand: FRONT RUNNER
Packaging dimensions: 1670x110x145
Weight: 6.000 Kg

Suitable for the following vehicles:	Engine	Year
Juego de barras de carga Universales

251.26 €

Price Without VAT

RSI Canopy Full Size Pickup Load Bar Kit / 1345mm (W) (KRCA016)

« prev next »

nIncludes all hardware and components needed to fit load bars on your Full Pickup when fitted with a RSI Canopy, including four (4) mounting feet, two (2) 1345mm load bars, an installation kit and fitting instructions. nThese load bars are mounted to your RSI Canopy via a set of supplied mounted feet. nUses the same strong, corrosion-free aluminum slats found in Front Runner Slimline II Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nThe load bars and mounting system can be used in the future as components to build a complete Front Runner roof rack. nMade from steel and durable, weather-resistant black powder-coated aluminum. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCA016
Brand: FRONT RUNNER
Packaging dimensions: 1450x115x155
Weight: 5.000 Kg

Suitable for the following vehicles:	Engine	Year
Juego de barras de carga Universales

231.09 €

Price Without VAT

Chevrolet Colorado/GMC Canyon ReTrax XR 5in (2015-Current) Triple Load Bar Kit (KRCC001)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Colorado/GMC Canyon w/ReTrax XR rails. This low profile solution includes 3 x 1425mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails. n nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. n nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. n nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCC001
Brand: FRONT RUNNER
Packaging dimensions: 1560x160x230
Weight: 12.000 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Chevrolet

500.00 €

Price Without VAT

Chevrolet Colorado/GMC Canyon ReTrax XR (2015-Current) Triple Load Bar Kit (KRCC002)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Colorado/GMC Canyon w/ReTrax XR rails. This low profile solution includes 3 x 1425mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCC002
Brand: FRONT RUNNER
Packaging dimensions: 1560x160x230
Weight: 12.000 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Chevrolet

500.00 €

Price Without VAT

Chevrolet Colorado/GMC Canyon ReTrax XR 5in (2015-Current) Double Load Bar Kit (KRCC003)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Colorado/GMC Canyon when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1425mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop-down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from stainless steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCC003
Brand: FRONT RUNNER
Packaging dimensions: 1500x160x155
Weight: 8.000 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Chevrolet

335.29 €

Price Without VAT

Chevrolet Colorado/GMC Canyon ReTrax XR 6in (2015-Current) Double Load Bar Kit (KRCC004)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Colorado/GMC Canyon when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1425mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop-down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from stainless steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCC004
Brand: FRONT RUNNER
Packaging dimensions: 1500x160x155
Weight: 8.000 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Chevrolet

335.29 €

Price Without VAT

Chevrolet Silverado Crew Cab / Short Load Bed (2007-Current) Double Load Bar Kit (KRCS004)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Silverado Crew Cab / Short Load Bed. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCS004
Brand: FRONT RUNNER
Packaging dimensions: 125x1685x310
Weight: 11.000 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Chevrolet

402.52 €

Price Without VAT

Chevrolet Silverado Crew Cab (2007-Current) Double Load Bar Kit (KRCS005)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Silverado Crew Cab. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCS005
Brand: FRONT RUNNER
Packaging dimensions: 1690x130x310
Weight: 12.000 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Chevrolet

474.79 €

Price Without VAT

Chevrolet Silverado Crew Cab / Short Load Bed (2007 - Current) Triple Load Bar Kit (KRCS006)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Silverado Crew Cab / Short Load Bed. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCS006
Brand: FRONT RUNNER
Packaging dimensions: 125x1685x385
Weight: 14.400 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Chevrolet

550.42 €

Price Without VAT

Chevrolet Silverado Crew Cab (2007-Current) Triple Load Bar Kit (KRCS007)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Silverado Crew Cab. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCS007
Brand: FRONT RUNNER
Packaging dimensions: 1605x130x390
Weight: 16.600 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Chevrolet

621.01 €

Price Without VAT

Chevrolet Silverado/GMC Sierra 1500/2500/3500 ReTrax XR 5'9in (2007-Current) Triple Load Bar Kit (KRCS008)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Silverado/GMC Sierra 1500/2500/3500 w/ReTrax XR rails. This low profile solution includes 3 x 1575mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCS008
Brand: FRONT RUNNER
Packaging dimensions: 1690x160x150
Weight: 10.000 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Chevrolet

533.61 €

Price Without VAT

Chevrolet Silverado/GMC Sierra 1500/2500/3500 ReTrax XR 6'6in (1988-Current) Triple Load Bar Kit (KRCS009)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Silverado/GMC Sierra 1500/2500/3500 w/ReTrax XR rails. This low profile solution includes 3 x 1575mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCS009
Brand: FRONT RUNNER
Packaging dimensions: 1690x160x150
Weight: 10.000 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Chevrolet

533.61 €

Price Without VAT

Chevrolet Silverado/GMC Sierra 1500/2500/3500 (1988-Current) ReTrax XR Triple Load Bar Kit (KRCS010)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Silverado/GMC Sierra 2500/3500 w/ReTrax XR rails. This low profile solution includes 3 x 1575mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCS010
Brand: FRONT RUNNER
Packaging dimensions: 1690x160x150
Weight: 10.000 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Chevrolet

533.61 €

Price Without VAT

Chevrolet Silverado/GMC Sierra 1500/2500/3500 (1988-Current) ReTrax XR Double Load Bar Kit (KRCS012)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Silverado/GMC Sierra 1500/2500/3500 when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1575mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop-down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from stainless steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRCS012
Brand: FRONT RUNNER
Packaging dimensions: 1690x160x155
Weight: 9.000 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Chevrolet

357.14 €

Price Without VAT

Chevrolet Silverado/GMC Sierra 1500/2500/3500 ReTrax XR 6'6in (1988-Current) Double Load Bar Kit (KRCS013)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Silverado/GMC Sierra 1500/2500/3500 when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1575mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop-down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from stainless steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.

Product code: KRCS013
Brand: FRONT RUNNER
Packaging dimensions: 1690x160x155
Weight: 9.000 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Chevrolet

357.14 €

Price Without VAT

Ram 1500 5.7' Crew Cab (2009-Current) Double Load Bar Kit (KRDR016)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Ram 1500 5.7' Crew Cab. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRDR016
Brand: FRONT RUNNER
Packaging dimensions: 1665x300x115
Weight: 11.400 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up RAM

402.52 €

Price Without VAT

Ram 1500 6.4' Crew Cab (2009-Current) Double Load Bar Kit (KRDR017)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Ram 1500 6.4' Crew Cab. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRDR017
Brand: FRONT RUNNER
Packaging dimensions: 1665x300x115
Weight: 12.200 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up RAM

474.79 €

Price Without VAT

Ram 1500 5.7' Crew Cab (2009-Current) Triple Load Bar Kit (KRDR019)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Ram 1500 Crew Cab. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from stainless steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRDR019
Brand: FRONT RUNNER
Packaging dimensions: 1595x380x130
Weight: 15.600 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up RAM

550.42 €

Price Without VAT

Ram 1500 6.4' Crew Cab (2009-Current) Triple Load Bar Kit (KRDR020)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Ram 1500 Crew Cab. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRDR020
Brand: FRONT RUNNER
Packaging dimensions: 1630x390x130
Weight: 16.400 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up RAM

621.01 €

Price Without VAT

Ram 1500 6.4' Quad Cab (2009-Current) Triple Load Bar Kit (KRDR021)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Ram 1500 Quad Cab. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from high strength steel and aluminum, protected with a weather-resistant black powder coat. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRDR021
Brand: FRONT RUNNER
Packaging dimensions: 1630x390x130
Weight: 16.400 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up RAM

621.01 €

Price Without VAT

Ram 1500/2500/3500 ReTrax XR (2009-Current) Triple Load Bar Kit (KRDR022)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Ram 1500/2500/3500 w/ReTrax XR rails. This low profile solution includes 3 x 1575mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRDR022
Brand: FRONT RUNNER
Packaging dimensions: 1690x160x150
Weight: 10.000 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up RAM

533.61 €

Price Without VAT

Ram 1500/2500/3500 ReTrax XR (2003-Current) Double Load Bar Kit (KRDR025)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Ram 1500/2500/3500 when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1575mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop-down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from stainless steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRDR025
Brand: FRONT RUNNER
Packaging dimensions: 1690x170x160
Weight: 8.000 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up RAM

357.14 €

Price Without VAT

Ford F-150 Raptor 5.5' (2009-Current) Double Load Bar Kit (KRFF022)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 Raptor 5.5'. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRFF022
Brand: FRONT RUNNER
Packaging dimensions: 1580x160x275
Weight: 12.200 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Ford

503.36 €

Price Without VAT

Ford F-150 5.5' Super Crew (2009-Current) Double Load Bar Kit (KRFF023)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 Super Crew. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Tracks and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the supplied Tracks. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRFF023
Brand: FRONT RUNNER
Packaging dimensions: 1630x160x160
Weight: 8.800 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Ford

503.36 €

Price Without VAT

Ford F-150 6.5' Super Crew (2009-Current) Double Load Bar Kit (KRFF024)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 Super Crew. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Tracks and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the supplied Tracks. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRFF024
Brand: FRONT RUNNER
Packaging dimensions: 1630x160x160
Weight: 8.800 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Ford

503.36 €

Price Without VAT

Ford F-150 Raptor 5.5' (2009-Current) Triple Load Bar Kit (KRFF025)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 Raptor 5.5'. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRFF025
Brand: FRONT RUNNER
Packaging dimensions: 165x1685x355
Weight: 16.400 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Ford

684.87 €

Price Without VAT

Ford F-150 5.5' Super Crew (2009-Current) Triple Load Bar Kit (KRFF026)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 5.5' Super Crew. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of tracks and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the supplied Tracks. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRFF026
Brand: FRONT RUNNER
Packaging dimensions: 1630x235x160
Weight: 13.600 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Ford

684.87 €

Price Without VAT

Ford F-150 6.5' Super Crew (2009-Current) Triple Load Bar Kit (KRFF027)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 6.5' Super Crew. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of tracks and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the supplied Tracks. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRFF027
Brand: FRONT RUNNER
Packaging dimensions: 165x1685x230
Weight: 13.200 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Ford

679.83 €

Price Without VAT

Ford F-150 ReTrax XR 5'6in (2004-Current) Triple Load Bar Kit (KRFF028)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 w/ReTrax XR rails. This low profile solution includes 3 x 1575mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRFF028
Brand: FRONT RUNNER
Packaging dimensions: 1690x160x150
Weight: 10.000 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Ford

533.61 €

Price Without VAT

Ford F-250-F-350 ReTrax XR 6'9in (1999-Current) Triple Load Bar Kit (KRFF031)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-250-F-350 w/ReTrax XR rails. This low profile solution includes 3 x 1575mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRFF031
Brand: FRONT RUNNER
Packaging dimensions: 1690x160x150
Weight: 10.000 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Ford

533.61 €

Price Without VAT

Ford F-150 ReTrax XR 5'6in (2004-Current) Double Load Bar Kit (KRFF033)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1575mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop-down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from stainless steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRFF033
Brand: FRONT RUNNER
Packaging dimensions: 1690x160x155
Weight: 9.000 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Ford

357.14 €

Price Without VAT

Ford F-150 ReTrax XR 6'6in (1997-Current) Double Load Bar Kit (KRFF034)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1575mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop-down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from stainless steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRFF034
Brand: FRONT RUNNER
Packaging dimensions: 1690x160x155
Weight: 9.000 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Ford

357.14 €

Price Without VAT

Ford F-250-F-350 ReTrax XR 6'9in (1999-Current) Double Load Bar Kit (KRFF036)

« prev next »

A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-250-F-350 when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1575mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions. nThe Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails. nAllows for gear to be mounted above the pickup’s load bed. nThe load bed retains its load-carrying ability, while the drop-down door functions as usual. nUses the same strong, corrosion-free aluminum slats found in Front Runner Racks. nThe sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats. nMade from stainless steel and a durable, weather-resistant black powder coated aluminum. nIncludes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle. nNote: If your Roll Top extrusion has a 6mm (0.24'') to 7mm (0.28'') slot opening, you may need RRAC962 for installation. nNote: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries. n* Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.

Product code: KRFF036
Brand: FRONT RUNNER
Packaging dimensions: 1690x170x160
Weight: 8.000 Kg

Suitable for the following vehicles:	Engine	Year
Para caja de Pick-Up Ford

357.14 €

Price Without VAT